Fluorescent Light Fixture Makeover

I am so excited to share this with you because I made a promise to myself that if I need to know how to do this, then others might appreciate my insight on how we tackled it as well!

We moved into our 1969 bungalow 11 years ago and for 11 years I looked at a truly retina-burning HUGGEEE fluorescent light fixture in our basement.  We didn't switch it out because it was actually inset into the ceiling, so that meant repairing a massive hole in the ceiling or finding a way around it and McGyvering it.  I opted to unleash my inner McGyver and this is the end result.

I will share the steps with you as my hubby and I join forces (I definitely needed extra hands to install this) to make a massive change in my Woman Cave Lounge.

Here is what the lovely gem looked like BEFORE...you may needs sunglasses.  Ohhh, my!

This was while I was getting ready to start my WCL reno.  And the moment I decided the nasty fixture needs to die.

 We ripped the old fixture out and started making plans for the new one. We measured the opening in the ceiling and built out a box to fit right back into the hole with 1/4" plywood. The frame is made of 1 x 2 pine. The frame fits the size of the hole and the plywood is attached to the top of the frame.

I wanted to do something that would easily give me a longer fixture length look but I didn't like anything in the stores.  I scoured Amazon and found these cute brass hanging sockets.  You can find them HERE and they are SUPER affordable which was important because, well, budgeting!!! :-)

I measured out the spots on the new box for light placement.  I decided on 3 hanging pendants because it filled the spot well. We drilled the holes for the wiring to go through. Also we predrilled holes on the frame to screw the fixture in the ceiling when it was time to install it. I used Rustoleum Chalked Spray paint in the color Charcoal to paint this out.  It was super easy to use and I love the finish it provides.  

Hubs mounted the lights on the new light box.  He did a great job! 

Hubs wired it in for me while I played foreman...just kidding, I totally helped, and then we installed it and screwed that bad boy up!  At this point I am beyond elated because it is looking DOPE!

I found these killer Amber Edison lightbulbs too which was by far the cheapest spot to get them.  I have since ordered more for other parts of my home.  They look SO great!! 

Once it was installed we added small trim around the outside, which I also sprayed with the Rustoleum Chalked Paint.  NOTE:  I usually am wearing pj's and Buffalo check flannel when I do my DIYs.  It's my signature move.  #lumberjackchic 

I think the total came to just over $100 for materials but when I compare the cost of ripping out the re-drywalling the downstairs, well...this was WAY more appealing!  I love how it turned out!! 

Thanks for stopping by! I realize that my next share needs to be WAY more detailed so bear with me as I settle into this process. 

**This blog contains affiliate links from which I earn a small commission. I never recommend anything unless I wholeheartedly stand behind it and believe in it.  It is of no additional cost to you. 

Cushion Covers in 10 Minutes

Feeding my Buffalo check addiction has been SO gratifying with these super fast & easy cushion covers. It literally took me 10(ish) min from start to finish, and once you make one, your next one will be faster.  Let's get started!

First things first, you are going to need fabric.  I just eyeballed it and grabbed a yard of this gorgeous teal flannel buffalo check.  If you want to be sure, measure your cushon sizes first. I knew from making the cushion cover for my Front Entry Reno that I was definitely good with one yard for 2 of these covers.

You will also need:
*scissors
*pins
*measuring tape
*iron & ironing board
*your cushions or inserts to cover (I have these GORJ cushions from Urban Barn that I am covering just for the holidays)
*matching thread

HOW TO MAKE COVERS:
Hold your cushions taut from corner to corner and measure across the top (width).  Do the same down the sides (length).  This will give you your base height & width measurements.
My cushions are 22" wide x 12" high.

Height - Add 1" to the height. (Mine: 12" + 1" = 13")
Width - Multiply the width by 2 then add 6 inches (Mine: 22 x 2 = 44, then + 6 = 50")

This is the size of the piece of fabric you will be cutting. Mine was 50" x 13".
NOTE: My cut fabric in pic below is folded in 1/2.

 With fabric right side down facing ironing board, press shorter ends in 1/4", then press them over again 3/4'.  Pin in place.  Repeat on opposite end. Stitch both ends.

With the fabric right sides together, overlap your hems about 4 inches.  I really just eyeballed where the center would be, but if you want to be precise, measure the halfway point.  After you have this overlapped, pin together, and your total width should match your first initial pillow measurement, as you can see below in pic.  Pin the other side as well.

Stitch across uppper and lower raw edges with a 1/2" seam.  Clip your corners, turn cushion cover right side out, and press.

Here is the back flap once pillow is inserted.

 Annddd, again, full view.

This is a really FUN way for me to add a bit of fuzy warmth in my living room on the cheap.  Plus, I will probably keep these up all winter, just because there can never be enough Buffalo Check in my life!

I freaking LOVE how it looks with my vintage ochre velvet cushion covers.
Have you made these? If so, did you find them easy?

Stay weird ;-)

Wendy

PS: I got my inspo from My Childhood Treasures